As a homeowner in Chicago, IL, you will encounter plumbing issues at one time or another and need to make repairs. Many problems require a professional to handle the job, but fixing a leaking toilet is something nearly everyone can do themselves if they follow a few easy steps. The most important thing is to address the leak right away before it causes any damage to your home.
Find the Source
Before you begin repairing the problem, you need to know what’s causing it. Often, the wax seal at the base of the toilet is to blame. Other times, it could be that it’s an old toilet and wasn’t installed properly. If you’re lucky, you may just need to tighten the tank or fix the tank flange with a repair strap.
Get Rid of the Water
Turn the water off with the valve at the back of the toilet and flush your leaking toilet to empty the bowl and tank. You may need a cup to scoop out the rest of the water or soak it up with a towel. Next, disconnect the water supply tube at the base of the toilet.
Take the Toilet Off
Now, gently rock the toilet back and forth to loosen the seal and set it down on its side. You’re already more than halfway through your toilet repair!
4. Install a New Gasket and Put the Toilet Back On
You should be able to easily scrape the old gasket off the flange and set a new one in its place. Put the toilet back on, making sure to press it down firmly to create a seal with the new gasket. Tighten the bolts, press down again and tighten the nuts before replacing the caps. All that’s left is to reconnect the water supply tube, turn the water valve back on and flush the toilet to make sure there are no leaks.
Repairing a leaking toilet can be as simple as following these four steps. However, if the leak stems from a more complicated issue, you may need to call a plumber or a water damage specialist if the damage is extensive.